Epoxy Shower Kit

Product Information

Enhance your shower experience with the Stone Coats Epoxy Shower Kit. Our kit creates sleek and waterproof wall panels, elevating your bathroom aesthetics. It includes all the necessary materials, including reinforced foam, for durable and lightweight shower walls. Learn the step-by-step process on our YouTube channel - Stone Coat Countertops. Upgrade your bathroom with our innovative shower solution and indulge in its beauty. Explore now!

You supply the 1/2'' - 1'' foam board, we'll supply everything else! 

This Epoxy Shower Kit will coat 40 square feet of shower panels with both the color coat and clear coat of epoxy.

Included in the Epoxy Shower Kit:

• 2 gallons of Stone Coat Countertop Epoxy
• 1 gallon of Stone Coat Quick Coat
• 1 Roll of Fiberglass Mesh

Don't forget to add your favorite epoxy color additives to match any style & decor! - Use any countertop finish as a shower wall design.

Quick Guide Instructions:

To apply Quick Coat to the cut-to-size foam panel, spread it at a rate of 3 ounces per square foot. Use a 1/8'' notch trowel to ensure even distribution. For a base color, tint the Quick Coat with epoxy dye. Next, apply the fiber mesh into the wet Quick Coat using a bondo spreader or a shower squeegee, pressing it into the epoxy layer. Allow it to cure for 3-4 hours. Then, apply a second layer of colored Quick Coat, ensuring to remove air bubbles by swiftly sweeping a torch 1-2'' from the surface. Let it cure for 3 hours. Mix Stone Coat Epoxy with your desired color and apply it to the reinforced foam panel. Allow it to cure before applying a clear coat of epoxy or the ultimate top coat as the final step. To install the panels vertically in a shower prepped for tile installation, use silicone. Additionally, seal the corner seams of the shower panels with silicone.