Terms & Conditions of Sale
Polytek® Development Corp. and California Medical Innovations LLC and Polytek® Development Corp.’s brands, including, without limitation, Alumilite, BCC Products, Blehm Plastics, Environmental Technology, Pro Marine Supplies, Stone Coat Countertops, Raw Material Suppliers, Incredible Solutions, Endurance Technologies, MAS Epoxies, Custom Polymer Designs, and Bristol Finish (in each case hereinafter referred to as “Polytek®”) are represented in the following Terms and Conditions of Sale.
The following Terms and Conditions of Sale are applicable to the sale of all products by Polytek® (the “Products”) to any purchaser thereof (“Buyer”). The following Terms and Conditions of Sale constitute the sole and entire agreement between you and Polytek® in connection with your purchase of Products from Polytek®. By submitting an order, you shall be deemed to have accepted these Terms and Conditions of Sale. No terms or conditions contained in any acknowledgement, receipt, email or other communication from you shall bind Polytek® unless otherwise expressly agreed in writing by an authorized officer of Polytek®. Any additional terms you propose in any written or oral communication from you to Polytek® shall be deemed to materially alter these Terms and Conditions of Sale. These Terms and Conditions of Sale shall be deemed to provide you with notification of Polytek®’s objection to any such additional or different terms that you propose to Polytek®. Any amendment, waiver or other alteration of the Terms and Conditions of Sale shall be effective only if made in a writing signed by a duly-authorized representative of Polytek® and Buyer’s attempts to alter such Terms and Conditions of Sale with printed purchase orders, acknowledgements or similar documentation shall be void. In the event of a conflict between these terms and conditions contained in any quotation, purchase order, invoice or final order acknowledgement and those contained in these Terms and Conditions of Sale, the terms contained in these Terms and Conditions of Sale shall govern. Without limiting the generality of the foregoing, Polytek®’s rights and obligations hereunder will not be qualified by or subject to any vendor credentialing, code of conduct, or similar requirements imposed by Buyer upon any of its vendors or suppliers.
Prices are subject to change without notice. Prices do not include applicable federal, state, regional, and local transactional costs and expenses, including, but not limited to, VAT, GST, freight, taxes, duties, tariffs, or other additional costs imposed by reason of the sale of the Products, which costs and expenses shall be the responsibility of Buyer. Our standard credit terms are Net 30 days for approved accounts. A credit card fee will be charged when used to pay balances on an open account. Past due accounts may incur 1.5% finance charges per month. We accept VISA, MasterCard, American Express, and PayPal. Upon approval, we may accept wire transfer, check, and ACH/EFT payments. Returned checks will incur a $40.00 returned check fee.
Orders placed via Polytek® websites must be paid in advance. Payment options are provided upon checkout.
Any claim concerning invoice amounts shall be made within ten (10) business days from date of receipt of invoice by Buyer, or shall be deemed void.
Sales & Use
Currently, Polytek® collects sales or use tax for Alabama, Alaska, Arizona, Arkansas, California, Colorado, Connecticut, District of Columbia, Florida, Georgia, Hawaii, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Nebraska, Nevada, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin and Wyoming. For these states, sales tax will be automatically added to your order. You are otherwise responsible for any applicable use tax on your purchases. If you are tax exempt, please call 1-610-559-8620 to place your order and provide a tax exemption certificate for your purchase.
Shipping terms vary by Polytek® brand as specified on Polytek® websites. You are responsible for the payment of all shipping costs. Depending on the Product, special or customer shipping options may be available as specified on Polytek® websites. Polytek® does not guarantee a delivery date. If you have a specified delivery date, please contact Polytek® via e-mail or phone. Polytek® shall pack and mark the Products according to its standard procedures for domestic and/or export delivery. For hazardous shipments, additional charges may apply and be added to your invoice. For "freeze-protect" on latex purchases, additional charges may apply. Unless otherwise agreed in writing, all Products shall be sold and delivered Ex Works (Incoterms 2020) from Polytek®’s facilities. Title and risk of loss shall pass to Buyer simultaneously with delivery. Buyer assumes all risk and liability for, and hereby agrees to indemnify Polytek® from and against all losses, liabilities, damages and claims whatsoever (whether for personal injury, property damages or otherwise), arising out of transportation, including unloading, storage, handling or use of any Products after title passes to Buyer. Prepaid freight and fuel surcharges may apply to certain orders. No COD shipments. Buyer may arrange, at its costs, for insurance of the Products for shipping. In no event may Buyer re-package or reformulate the Products and then attempt to resell in parts.
Unfortunately, we are unable to accept any epoxy returns because our epoxy product is classified by international regulation as a dangerous good in limited quantity. The regulations on shipping are very strict and we are committed to remaining compliant with these standards. Specific certifications are required for shipping and handling our epoxy products.
If the product is unopened in the original shipping box(es) we sent you, and it is within one week of delivery, FedEx may agree to accept the package as a refusal at their own discretion.
If this isn’t the case, and the box has already been opened, you could post your product to our Stone Coat Countertop’s Insiders group on Facebook. This way, you could possibly get your money back by selling your product through our group page.
However, we will accept returns on non-hazardous items, including our PolyColor Metallic Powder, Alumilite Liquid Dyes, Undercoat, and our tools. The return must be sent back to us within 30 days of receiving your product. Once we receive it, if it’s intact and unused, we’ll refund the product total.
You hereby agree and acknowledge that Polytek®’s sales agents shall not have the authority to bind or in any way alter the terms and provisions of these Terms and Conditions of Sale. Your use of any Products purchased shall be deemed conclusively that all such Products are conforming and satisfactory to you.
Warranty/ Rejecting Non-Conforming Products
Polytek® warrants to you that most unopened Products, with the exception of latex-based Products, will, for a period of six (6) months from the shipment date, conform to the Product specifications. Latex-based Products will, for a period of three (3) months from the shipment date, conform to the product specifications. The obligation of Polytek®, and your sole and exclusive remedy, pursuant to this warranty shall be for Polytek® (at its option) to repair or replace any defective product which is returned to Polytek®’s principal place of business, with transportation charges prepaid and thereafter determined by Polytek® to not comply with the terms of Polytek®’s warranty above. Notwithstanding the foregoing, Polytek® shall have no warranty obligation hereunder if the Product becomes defective in whole or in part as the result of alterations not made by Polytek® or as the result of improper use or storage, or misapplication after it has been delivered to you or damage in shipping. Any warranty made by Polytek® will be expressly subject to proper use of the Products in accordance with any directions for use or other applicable instructions or documentation. No warranty shall apply in situations of error, omission, or negligence in connection with installation, operation, or use of the Products. Upon receipt of the Products, Buyer agrees to immediately inspect and/or test the Products. The Products shall be deemed accepted by Buyer, and all claims with respect to any nonconforming Products shall be deemed waived by Buyer, unless Buyer provides Polytek®, within thirty (30) days of the invoice date, a written notice specifying all defects or discrepancies in the quality or quantity of the Products. Buyer shall permit Polytek® to inspect any damaged or otherwise nonconforming Products. Polytek® will repair or replace non-conforming Products rejected by you, which is Buyer’s sole remedy, provided that you report the non-conforming Products to Polytek® in writing within thirty (30) days of the invoice date. If you fail to notify Polytek® of any non-conformance within thirty (30) days of the invoice date, you shall be deemed to have accepted all such Products as delivered. No repair or replacement under Polytek®’s warranty obligations will extend or enlarge the warranty period.
EXCEPT AS SET FORTH HEREIN, POLYTEK® MAKES NO OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND YOU ACKNOWLEDGE THAT YOU ARE NOT RELYING UPON POLYTEK®’S SKILL OR JUDGMENT TO SELECT OR FURNISH PRODUCTS OR GOODS SUITABLE FOR ANY PARTICULAR PURPOSE OR UPON ANY AFFIRMATIONS OF FACT OR PROMISES OF POLYTEK® WHICH EXTEND BEYOND POLYTEK®’S SPECIFICATIONS. IN THAT REGARD, AND EXCEPT AS OTHERWISE EXPRESSLY PROVIDED HEREIN, YOU AGREE AND ACKNOWLEDGE THAT YOU ARE ACCEPTING THE PRODUCTS ON AN “AS-IS” AND “WITH ALL FAULTS” BASIS. FURTHERMORE, YOU HEREBY EXPRESSLY AGREE AND ACKNOWLEDGE THAT POLYTEK® SHALL HAVE NO LIABILITY OF ANY NATURE HEREUNDER BEYOND REPLACEMENT OR REPAIR OF ANY DEFECTIVE PRODUCTS. IN ADDITION, YOU HEREBY EXPRESSLY AGREE AND ACKNOWLEDGE THAT POLYTEK® SHALL HAVE NO LIABILITY OR OBLIGATION OF ANY NATURE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, LOSS OF REVENUE OR PROFITS OR DAMAGE TO PERSONS OR PROPERTY) ARISING OUT OF OR IN ANY WAY RELATED TO YOUR ORDER OR THE PRODUCTS REGARDLESS OF WHETHER SUCH DAMAGES ARE BASED IN TORT, WARRANTY, CONTRACT OR ANY OTHER LEGAL AND / OR EQUITABLE THEORY, AND EVEN IF POLYTEK® HAS BEEN ADVISED IN ADVANCE OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING ANY OTHER PROVISION HEREIN TO THE CONTRARY, IN NO EVENT SHALL POLYTEK®’S TOTAL LIABILITY TO YOU EXCEED THE PRICE ACTUALLY PAID BY YOU FOR THE PRODUCT AT ISSUE.
Polytek®’s performance shall in all cases be subject to delays resulting from governmental requirements or orders, strikes, or other concerted acts of workmen, fires, floods, explosions, riots, war or armed conflict (declared or undeclared), accidents, acts of God, acts of terrorism, pandemics, epidemics, delays in transportation or inability to obtain necessary labor, materials or supplies or any cause which renders Polytek®’s performance commercially impractical and other causes reasonably beyond Polytek®’s control.
Compliance with Laws
Buyer represents and warrants that the Products will not be used, resold, transferred, exported or reused in any way by Buyer in violation of any laws, regulations of any federal, local, state or other governmental entity, including export/import controls imposed by the U.S. or any other government or government agency.
In the event that any provision of these Terms and Conditions of Sale shall be invalid, illegal or otherwise unenforceable, the validity, legality and enforceability of the remaining provisions shall in no way be affected or impaired thereby.
Governing Law/Choice of Venue
Your order and all payments are being made to Polytek®’s headquarters in the Commonwealth of Pennsylvania, and the terms and conditions of your transaction (along with all rights, duties and obligations arising hereunder) shall be construed, interpreted and enforced in accordance with the laws of the Commonwealth of Pennsylvania without regard to its conflicts of law rules that would necessitate the application of the laws of any other jurisdiction. You also agree that any claim or action relating in any way to your order (except actions in which Polytek® seeks equitable relief) shall be brought in the Court of Common Pleas of Northampton County, Pennsylvania, or if based solely upon federal law, in the United States District Court for the Eastern District of Pennsylvania. You hereby submit to the exclusive jurisdiction of said Courts. Furthermore, you agree that venue in said Courts shall be proper in all respects and covenants not to assert any defense or objection to the venue of said Courts.
Successors and Assigns
You may not transfer or assign any of your rights or delegate any of your obligations hereunder without the express prior written consent of Polytek®. These Terms and Conditions of Sale shall be binding upon, and inure to the benefit of Polytek® and its respective successors and assigns, including any corporation with which, or into which, Polytek® may be merged or which may succeed to its assets or business.
No Transfer of IP
You and Polytek® expressly agree and covenant that except as otherwise expressly provided in a separate written agreement executed by you and Polytek®, the sale of the Products shall not be construed as granting any right, license, interest or claim of any nature in any trademark, service mark, patent, trade secret, invention, intellectual property right, or confidential information of Polytek®. You agree and covenant not to copy, reverse engineer or otherwise decompile the Products for any commercial purpose.
You shall be solely responsible for complying with any and all laws and/or regulations governing the exportation of any Products delivered hereunder from the United States and the importation of any such Products in the country of destination, including, without limitation, the payment of any taxes and/or duties thereof.
The waiver by Polytek® of any term, covenant, agreement or condition herein contained shall not be deemed to be a waiver of any subsequent breach of the same or any other term, covenant, agreement or condition herein contained. No covenant, term, agreement or condition of these Terms and Conditions of Sale shall be deemed to have been waived by a party unless such waiver is in writing by such party.
These Terms and Conditions of Sale contain the entire understanding between the parties hereto with respect to the subject matter hereof, and supersede all prior and contemporaneous agreements and understanding, inducements or conditions, express or implied, oral or written, among you and Polytek® with respect to your purchase of the Products. These Terms and Conditions of Sale may only be amended in writing and signed by an authorized corporate officer of Polytek®.
You shall and hereby covenant to protect, defend, indemnify and hold harmless Polytek® (which for this purpose shall include Polytek®’s parent companies, affiliates, subsidiaries, associates, directors, officers, employees, agents, successors and assigns) of, from and against any and all losses or damages, including (without limitation) any judgments, civil penalties, interest, expenses and costs including (without limitation) attorneys’ fees, claims, lawsuits, actions, proceedings or investigations (“Claims”) which are made or brought against Polytek® (or other person indemnified hereunder) by any person, government or entity arising out of, in connection with or in any way related to (a) the death of or injury to any person, or damage to any property, that resulted or is alleged to have resulted from the negligence or willful misconduct of you, your employees, subcontractors, and agents, in the performance of your obligations hereunder, or from your use of the Products sold hereunder; (b) any drawings, schematics, promotional or advertising matter, guarantees, warranties, labels, or instructions furnished by you or submitted to Polytek® by you; (c) any infringement of any patent, design, trade name, trademark, copyright, trade secret, or any other intellectual property right or entitlement of any third party due to your use of the Products; or (d) any environmental, property or toxic tort claim, lawsuit, judgment, loss, civil penalty or action.