Multi Colored Epoxy Mix & Pour Instructions

Here is a step-by-step guide to create a multi colored epoxy pour. When finished, you will have a professional and beautiful epoxy finish. Follow these steps to do your own multi colored epoxy pour.

Click More Instructional Videos

First, you will need:

● 2 coats of paint and primer in 1, tinted natural gray

Allow the paint to dry a minimum of 24 hours. Sand with 220 grit between coats and before pouring the mixed colored epoxy.

Multi Colored Epoxy Pour Checklist

● Stone Coat Countertop Epoxy

● Propane Torch

● Chop Brush

● Drill, Mixing Bucket, Paddle Mixer

● Glove

● Mixing Cups

● Mixing Sticks

Metallic Powders :

● Copper

● Rainforest Green

● Blue Earth

● Coffee

● Gold

● Black

● White

● Deep Silver

● Black Glitter

● Silver Glitter

Buy Stone Coat Epoxy Supplies Here

Mix Up Clear Stone Coat Countertop Epoxy

Mix for 2 minutes with a paddle mixer and drill. Hold the bucket. Scrape the sides and bottom on low speed.

Amount and ratio:

● 3oz. Per sq. ft.

● 1:1 ratio by volume

Add a spoonful of metallic powder to your mixing cups.

Check Out Our Metallic Powders

Pour in clear Mixed Epoxy into the metallic powder mixing cups.

Mix thoroughly.

Pour out your mixed metallic epoxy in a striated pattern.

Use your gloved hand to meld the metallic epoxy together.

Rub the edges with your gloved hands to smooth and ensure even coating. Use a propane torch or heat gun to remove air incorporated into the epoxy while mixing.

The next day, apply a clear coat of epoxy.

And to recap what needs to be done for your multi colored epoxy pour:

● Sand with 220, wipe dust

● 3oz. Per sq. ft. of project

● 1:1 ratio by volume

● Mix for 2 minutes with paddle mixer/drill

● Apply

● Trowel

● Chop

● Torch

Buy Stone Coat Epoxy Supplies Here