Ultimate Sample Pack

    In our ultimate sample pack you will receive our 1 gallon kit of epoxy, 4 brushes, (1) 1/8" square notch trowel, Black, White, and Copper Base Color Tints. Clay, Bronze, Pearl, Gold, Copper, Deep Silver, Bright Silver, Black, Coffee, and White Metallic Powders. Silver and Black Glitters. As well as Pyrite and Southwest Desert Mica Flakes. These are all of the additives needed to create these recipes on your 12" x 18" sample boards to show and astound your customers with what you can achieve with Stone Coat Countertop Epoxy!

 

There are a few items you will need to source from your local hardware store.

Rustoleum Spray Paints-  White, Copper, Black, Dark Gray, Hunter Green, Silver, and Stone Texture Accent colors Mineral Brown, Bleached Stone, and Stone Sienna.

Behr Paint and Primer in One- Broadway(PPU18-20), Ethiopia(PPU5-06), and Natural gray(PPU18-10)

From Amazon-  Montana Effect Marble Spray

Below are all of the recipes that this Ultimate Sample Pack has been designed to create. Simply follow the step by step and become amazed at your first time results. Remember call anytime for free project support, You Got This!

   

Color Recipe:

Behr Paint and Primer in One: Broadway

Mix SCC epoxy and tint with SCC black base color tint

Pour, trowel, and Chop the surface

Spray copper and white spray paint onto project surface

Twist 3 Mill thick plastic sheeting and lay twisted plastic down on project surface. Lift up gently and repeat until desired effect is achieved.

Torch

Color Recipe Earth Tone

Mix SCC Coffee Metallic powder & Pearl Metallic powder in SCC clear epoxy.

Trowel out the metallic epoxy and chop and meld together. Brush the top out in long strokes to make "grain"

Fog with black spray paint and 91% alcohol mixed with SCC bright silver metallic. Use a heavy mist bottle.

Fog again with black spray paint and a fine mist Alcohol spray mixed with SCC clay.

Fog again with black spray paint and a fine mist Alcohol spray mixed with SCC Gold.

Fog again with black spray paint and a fine mist Alcohol spray mixed with SCC Pearl.

Mix a small batch of SCC epoxy in clear and add veins and blobs to make fractures and crystals.

Next day sand, wipe dust, add clear coat, torch, 3 times minimum and let it dry!

Color recipe:

Behr Paint and primer in One: Broadway

Fog on Montana Marble Effect : White

Apply clear SCC epoxy

Chop the surface

Torch

Color recipe:

Behr Paint and Primer in one: Broadway

Mix clear SCC epoxy, then add silver glitter, silver mica, crush pearl mica, and black glitter.

Mix again Pour and trowel Chop the surface

Torch

Apply Clear SCC epoxy Chop the surface Torch

Color Recipe

Piece 1: Behr Paint and primer in one: Natural Gray Fog on Stone texture accent spray paint colors Mineral brown, Bleached stone, and Stone sienna.

Sand with 220 grit sand paper when dry Mix SCC epoxy Pour and trowel Chop the surface and Torch

Piece 2: Behr Paint and Primer in one: Suede Gray Fog on Mineral Brown, Stone sienna, and Bleached stone.

Sand with 220 grit sand paper when dry Mix SCC epoxy Pour and Trowel Chop the surface and Torch

Color Recipe:

Behr Paint and Primer in one: Broadway

Fog on Dark gray spray paint Mix and pour clear SCC epoxy Trowel and chop the surface

Torch

Tint separate batch of SCC epoxy with white gloss spray paint and white SCC metallic powder.

Drag tinted SCC epoxy through working surface with a paint stick.

Torch 

Color Recipe:

Behr Paint and Primer in one: Natural Gray ​ Apply clear SCC Epoxy Mixed with SCC Silver Mica, SCC Crushed pearl Mica, and SCC silver glitter.

Trowel and chop the surface

Torch

Color Recipe:

Behr Paint and Primer in One: Natural Gray Fog on undertones with white spray paint Mix SCC epoxy and tint with SCC white base color tint, add Pearl and white metallic powders

Pour and Trowel

Chop the surface then Chop in Black spray paint

Torch

Color Recipe:

Paint and primer in one: SCC copper base color tint

Mix SCC epoxy and tint with SCC copper metallic powder

Pour and trowel

Chop the surface

Torch

Color Recipe: Paint and Primer in One: Broadway (Black) Mix SCC epoxy and split into 3 separate batches. Tint these separate batches with SCC base color tints Black, and White. Tint the remaining batch with SCC Clay metallic powder. Mix and Pour these colors onto your project surface randomly, Do not allow the colors to touch each other. Using a sponge, push the epoxy around the surface randomly.

Torch, then tilt your project to move and meld the colors. Let cure for at least 24 hours and then sand with 220 grit sand paper.

Wipe off the sanding dust with a dry blue shop towel.

Mix SCC epoxy and leave clear.

Pour, trowel, and chop the surface, then torch 3x.

Color Recipe: Paint and Primer in One: Ethiopia (Brown) Mix SCC epoxy and tint with SCC Bronze Metallic powder Pour, Trowel, and chop the surface

Torch

Rag the top with a paper towel and torch again.

Re-chop the surface with a Paper towel.

Mist the surface with SCC Pearl, Gold, Copper, and Black metallic powders mixed with 91% IPA

Fog on Hunter green spray paint OR mist with SCC Tropical turquoise Metallic powder

Fog the project surface with White, Black, and Silver Spray paints. Mist the surface with SCC Gold, Copper, Black, and Deep Silver metallic colors mixed with 91%IPA

Fog on Black spray paint and mist with Deep Silver

Drag veins with a paint stick through the project with White, Black, and Silver Spray paints.

Load the tip of your paint stick with clear epoxy, and spray on Metallic Silver spray paint, drizzle this through your project to create fine lines.

Spray White spray paint onto the edge of your paint stick and drag it through the surface to create veins.

Torch to move the veins around. Rag the top with a glove Torch