null
phone: +15414501976

Epoxy Quick Coat

$34.99 - $124.99

Product Information

Stone Coat Epoxy Quick Coat - Non-UV Resistant

Introducing Stone Coat Epoxy Quick Coat, the perfect solution for seaming MDF and plywood countertop substrates. Our specially formulated Quick Coat is also ideal for installing steel inlays in our woodworking slab tables. Woodworkers absolutely adore it for coating 3D objects, filling seams, knots, cracks, and even applying a seal coat to the underside of their projects to save valuable time. With a quick drying time of just 3-4 hours, you can effortlessly move on to the next step without any unnecessary delays. Artists adore utilizing Quick Coat Epoxy to craft stunning geodes for their artistic masterpieces. Experience the convenience and efficiency of Stone Coat Epoxy Quick Coat today! 

Quick Guide Directions:

1. Prepare surface. For best results, woodworking projects should contain less than 10-12% moisture level before applying epoxy. If applying Quick Coat as a second layer, sand the cured epoxy surface with 220 grit sandpaper, wipe the dust with 91% isopropyl alcohol. 

2. Mix 1 parts A and 1 part B by volume for 60-90 seconds or until fully mixed. Besure to scrape the sides and bottom of the bucket midway through mixing.

Coverage:

When applied at 3 ounces per square foot (shower wall mesh install, epoxy clear coat) 40 square feet 1 coat of epoxy.

Here is a video of Quick Coat being used as a Geode

 Using Quick Coat for Geodes

 

Technical Specs